Improved Racing - RaceFlux Male Flare to J2044 Quick-Connect Female Plastic Button Adapter Fitting
Modern vehicles commonly use the SAE J2044 standard for quick connect fittings in applications such as air breather lines, vacuum lines, PCV lines, coolant lines, and Electronic Fuel Injection (EFI) fuel lines.
These fittings allow you to adapt the OEM style J2044 male barbs to AN hoses. This aluminum fitting locks in place on the male barb and can be released by pressing the plastic button.
To determine the size needed, measure the outer diameter of the male mating barb and refer to the diagram below.
Fuel systems commonly use the 3/8" size quick connect fittings. Most GM vehicles use M10 (9.89mm) quick release fittings for PCV breather lines. Ford and Dodge commonly use the 5/8" (15.82mm) quick release fittings for PCV breather lines. Measure your fittings to confirm the exact size needed.
Features and Benefits
- OEM style J2044 standard female quick-connect adapter to industry standard male AN / JIC flared 37-degree sealing surface
- Lightweight black anodized aluminum construction
- Viton (FKM) o-rings for compatibility with all fuels, coolant, water, crankcase vapors, etc.
- Lock release button made from Nylon plastic
| Part # |
MQFD
|
|---|---|
| Brand |
RaceFlux
|
| Color |
Black
|
| Primary Material |
6061-T6 aluminum
|
| Finish |
Type II Anodized
|
| Fitting Angle |
Straight
|
| Connection Type |
AN Flare 37º JIC
|
| Connection A Type |
AN Flare
|
| Connection A Gender |
M
|
| Connection B Type |
J2044
|
| Connection B Gender |
N/A
|
| Maximum Operating Temperature |
302°F (150°C)
|
| Minimum Operating Temperature |
-40°F (-40°C)
|
| Maximum Operating Pressure |
300 psi (20.68 bar)
|
| O-Ring / Gasket Material |
FKM (Viton)
|
| Swivel |
None
on installation only |
| Applications |
Breather and vent lines
Fuel (in-tank) Fuel (outside of tank) Gauge and sensor lines Hydraulics: low pressure (return lines) Vacuum lines Other oil water and air systems |
| Fluid Compatibility |
Air
Alcohol Coolants Engine oil Ethanol-based fuels (E85+) Ethanol/gasoline mixtures Gear oil Methanol Nitromethane Nitrous Oxide Power Steering Fluid Racing fuels Transmission fluid Vacuum Water |
| Standards & Certifications |
AN Threads & 37° Flares per SAE AS4395
Anodizing per ISO 7599 |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Improved Racing - RaceFlux Male Flare to J2044 Quick-Connect Female Plastic Button Adapter Fitting
Improved Racing - RaceFlux Male Flare to J2044 Quick-Connect Female Plastic Button Adapter Fitting
Modern vehicles commonly use the SAE J2044 standard for quick connect fittings in applications such as air breather lines, vacuum lines, PCV lines, coolant lines, and Electronic Fuel Injection (EFI) fuel lines.
These fittings allow you to adapt the OEM style J2044 male barbs to AN hoses. This aluminum fitting locks in place on the male barb and can be released by pressing the plastic button.
To determine the size needed, measure the outer diameter of the male mating barb and refer to the diagram below.
Fuel systems commonly use the 3/8" size quick connect fittings. Most GM vehicles use M10 (9.89mm) quick release fittings for PCV breather lines. Ford and Dodge commonly use the 5/8" (15.82mm) quick release fittings for PCV breather lines. Measure your fittings to confirm the exact size needed.
Features and Benefits
- OEM style J2044 standard female quick-connect adapter to industry standard male AN / JIC flared 37-degree sealing surface
- Lightweight black anodized aluminum construction
- Viton (FKM) o-rings for compatibility with all fuels, coolant, water, crankcase vapors, etc.
- Lock release button made from Nylon plastic
| Part # |
MQFD
|
|---|---|
| Brand |
RaceFlux
|
| Color |
Black
|
| Primary Material |
6061-T6 aluminum
|
| Finish |
Type II Anodized
|
| Fitting Angle |
Straight
|
| Connection Type |
AN Flare 37º JIC
|
| Connection A Type |
AN Flare
|
| Connection A Gender |
M
|
| Connection B Type |
J2044
|
| Connection B Gender |
N/A
|
| Maximum Operating Temperature |
302°F (150°C)
|
| Minimum Operating Temperature |
-40°F (-40°C)
|
| Maximum Operating Pressure |
300 psi (20.68 bar)
|
| O-Ring / Gasket Material |
FKM (Viton)
|
| Swivel |
None
on installation only |
| Applications |
Breather and vent lines
Fuel (in-tank) Fuel (outside of tank) Gauge and sensor lines Hydraulics: low pressure (return lines) Vacuum lines Other oil water and air systems |
| Fluid Compatibility |
Air
Alcohol Coolants Engine oil Ethanol-based fuels (E85+) Ethanol/gasoline mixtures Gear oil Methanol Nitromethane Nitrous Oxide Power Steering Fluid Racing fuels Transmission fluid Vacuum Water |
| Standards & Certifications |
AN Threads & 37° Flares per SAE AS4395
Anodizing per ISO 7599 |
Original: $12.90
-70%$12.90
$3.87Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Modern vehicles commonly use the SAE J2044 standard for quick connect fittings in applications such as air breather lines, vacuum lines, PCV lines, coolant lines, and Electronic Fuel Injection (EFI) fuel lines.
These fittings allow you to adapt the OEM style J2044 male barbs to AN hoses. This aluminum fitting locks in place on the male barb and can be released by pressing the plastic button.
To determine the size needed, measure the outer diameter of the male mating barb and refer to the diagram below.
Fuel systems commonly use the 3/8" size quick connect fittings. Most GM vehicles use M10 (9.89mm) quick release fittings for PCV breather lines. Ford and Dodge commonly use the 5/8" (15.82mm) quick release fittings for PCV breather lines. Measure your fittings to confirm the exact size needed.
Features and Benefits
- OEM style J2044 standard female quick-connect adapter to industry standard male AN / JIC flared 37-degree sealing surface
- Lightweight black anodized aluminum construction
- Viton (FKM) o-rings for compatibility with all fuels, coolant, water, crankcase vapors, etc.
- Lock release button made from Nylon plastic
| Part # |
MQFD
|
|---|---|
| Brand |
RaceFlux
|
| Color |
Black
|
| Primary Material |
6061-T6 aluminum
|
| Finish |
Type II Anodized
|
| Fitting Angle |
Straight
|
| Connection Type |
AN Flare 37º JIC
|
| Connection A Type |
AN Flare
|
| Connection A Gender |
M
|
| Connection B Type |
J2044
|
| Connection B Gender |
N/A
|
| Maximum Operating Temperature |
302°F (150°C)
|
| Minimum Operating Temperature |
-40°F (-40°C)
|
| Maximum Operating Pressure |
300 psi (20.68 bar)
|
| O-Ring / Gasket Material |
FKM (Viton)
|
| Swivel |
None
on installation only |
| Applications |
Breather and vent lines
Fuel (in-tank) Fuel (outside of tank) Gauge and sensor lines Hydraulics: low pressure (return lines) Vacuum lines Other oil water and air systems |
| Fluid Compatibility |
Air
Alcohol Coolants Engine oil Ethanol-based fuels (E85+) Ethanol/gasoline mixtures Gear oil Methanol Nitromethane Nitrous Oxide Power Steering Fluid Racing fuels Transmission fluid Vacuum Water |
| Standards & Certifications |
AN Threads & 37° Flares per SAE AS4395
Anodizing per ISO 7599 |
